Page Title Center

Specificaties

Afmetingen: Dikte: 0,05 mm - 16 mm
Breedte: ≥ 610 mm, 1000 mm, 4' (1219 mm), 1220 mm, 1500 mm, 2000 mm
Aangepaste maat moet met ons worden bevestigd

Leveringsstaat: Koudgewalst, Warmgewalst

Afwerking: 2B, No.1, 1D, No.2, No.4, BA, 6K, Spiegel Beëindigd, 8K, Haarlijn met pvc

MillOrigin: TISCO, ZPSS, BAOSTEEL, JISCO, ZSESS, ATI, SMC, HAYNES, VDM, ArcelorMittal, Outokumpu,         enz.

Normen: ASTM A240, ASTM A480, JIS G4303, BS 1449, DIN17441, G4305

Kenmerken: Helder oppervlak, anticorrosief, hittebestendigheid, hoge prestaties van taaiheid en mechanische eigenschappen, weerstand tegen zuur en alkali, oxidatieweerstand.

Toepassingen: chemische fabrieken, voedingsindustrie, medische industrie, aardolie, energie, huishoudelijke apparaten, bouw, voertuigen, kookgerei en enz.

Roestvrij staalbladen en -platen Specificatie: ASTM A240 / ASME SA240
Afmeting Standaard: JIS, AISI, ASTM, GB, DIN, EN, enz.
Breedte: 1000 mm, 1219 mm, 1500 mm, 1800 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, enz.
Lengte: 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, enz.
Dikte : 4mm tot 120 mm
Vorm: Rollen, Folies, Broodjes, Duidelijk Blad, Vulplaatje, Geperforeerd Blad, Geruite Plaat, Strook, Flats, Leeg (Cirkel), Ring (Flens) enz.
Oppervlakteafwerking: Warmgewalste plaat (HR), Koudgewalste plaat (CR), 2B, 2D, BEDELAARS, NO.1, NO.4, NO.8, 8K, spiegel, Geruit, in reliëf gemaakt, haarlijn, zandstraal, borstel, ets, SATIJN (Met een laag bedekte Plastic Association) enz.

Specificatie: ASTM A240/ASME SA240
Afmeting Standaard: JIS, AISI, ASTM, GB, DIN, EN, enz.
Breedte: 5mm150mm, enz.
Lengte: 4.00mm100mm, enz.
Dikte: 4 mm tot 100 mm
Vorm: Rollen, Folies, Broodjes, Duidelijk Blad, Vulplaat, Geperforeerd Blad, Geruite Plaat, Strook, Flats, Leeg (Cirkel), Ring (Flens) enz.    
Oppervlakteafwerking: Warmgewalste plaat (HR), Koudgewalste plaat (CR), 2B, 2D, BEDELAARS, NO.1, NO.4, NO.8, 8K, spiegel, Geruit, reliëf, haarlijn, zandstraal, Borstel, ets, SATIJN (Met een laag bedekt plastic) enz.

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Specificatie van roestvrijstalen 202-platen en -platen
Roestvrij staalbladen en -platen Specificatie: ASTM A240/ASME SA240
Afmeting Standaard: JIS, AISI, ASTM, GB, DIN, EN, enz.
Breedte: 1250 MM / 1500 MM / 2000 MM / 04 Voeten / 05 Voeten en aangepaste snijbreedte vanaf vereiste
Lengte: 2400 MM / 2420 MM / 6000 MM / 08 Voeten / 10 Voeten / Spoel gesneden en aangepaste gesneden lengte vanaf vereiste
Dikte : 0,6 MM TOT 80 MM DIKTE
Vorm: Rollen, Folies, Broodjes, Duidelijk Blad, Vulplaat, Geperforeerd Blad, Geruite Plaat, Strook, Flats, Leeg (Cirkel), Ring (Flens) enz.
Oppervlakteafwerking: Warmgewalste plaat (HR), Koudgewalste plaat (CR), 2B, 2D, BEDELAARS, NO.1, NO.4, NO.8, 8K, spiegel, Geruit, reliëf, haarlijn, zandstraal, Borstel, ets, SATIJN (Met een laag bedekt plastic) enz.

Specificatie van 316LMOD/316L UG/724L/EN 1.4435 Naadloze roestvrijstalen buis/buis 3000mm
Naadloze roestvrijstalen buis/buisspecificatie: ASTM SA-240/SA-213
Afmeting Standaard: JIS, AISI, ASTM, GB, DIN, EN, enz.
De meeste naadloze buismaten zijn koudgetrokken en warm afgewerkt verkrijgbaar. De meeste maten - tot en met 3/4" buitendiameter in zowel naadloos als gelast - voldoen aan
Diameter Maat : Naadloos - 1/2" NB TOT 18" NB/Gelast/ERW- 1" NB TOT 16" NB/EFW - 8" NB TOT 110" NB
Vorm: Rollen, Folies, Broodjes, Duidelijk Blad, Vulplaatje, Geperforeerd Blad, Geruite Plaat, Strook, Flats, Leeg (Cirkel), Ring (Flens) enz.

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Hastelloy Sheets and Plates Specification : ASTM B575 / ASME SB575
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Hastelloy Sheets and Plates Specification : ASTM B575 / ASME SB575
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Specifications : ASTM A790 / ASME SA790, ASTM A789 / ASME SA A789
Grade : UNS S31803, S32205
Size : ½”NB – 24”NB
Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Outer Diameter: 6.0-630mm
Type : Seamless / ERW / Welded / Fabricated Pipes
Form : Round, Square, Rectangular, Oval, Hydraulic Etc
Length : Single Random, Double Random & Required Length
End : Plain End, Beveled End, Treaded
End Protection : Plastic Caps
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing : Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials : Sizes and Specifications other than above can be manufactured on request

Specifications : ASTM A790 / ASME SA790, ASTM A789 / ASME SA A789
Grade : UNS S31803, S32205
Size : ½”NB – 24”NB
Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Outer Diameter: 6.0-630mm
Type : Seamless / ERW / Welded / Fabricated Pipes
Form : Round, Square, Rectangular, Oval, Hydraulic Etc
Length : Single Random, Double Random & Required Length
End : Plain End, Beveled End, Treaded
End Protection : Plastic Caps
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing : Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials : Sizes and Specifications other than above can be manufactured on request

Specification of Stainless Steel 202 Seamless Welded Pipes And Tubes

Stainless Steel Pipe Specification : ASTM A312, A358 / ASME SA312, SA358
SS Tube Specification : ASTM A213, A269, A249, A511, A554 / ASME SA213, SA269, SA249, SA511, SA554
Pipe Size : 1/8” NB to 24” NB, 1/4” OD to 24” OD sizes.
Tube Size : 1/2" OD to 8" OD.
Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type : Seamless / ERW / Welded / Fabricated Pipes
Form : Round, Square, Rectangular, Oval, Hydraulic Etc
Length : Single Random, Double Random & Required Length
End : Plain End, Beveled End, Treaded
End Protection : Plastic Caps
Outside Finish : 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing : Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials : Sizes and Specifications other than above can be manufactured on request